Your cart is empty
0
items
Subtotal:$0.00
Shop Aftermarket Truck Parts & Tires
:
from
to
 |  | |
Zone 4.5" Radius Arm Lift Kit 2019-2023 RAM 2500 4WD TRUCKS.
SKU: ZOND78N-FQMS
Lift Kit Suspension; 4-1/2 Inch Front Lift; 2-1/2 Inch Rear Lift; With Front And Rear Nitro Shock Absorbers In Kit; Black Components; With Coil Springs/ Coil Spring Spacers/ Radius Arms/ Crossmember/ Track Bar Brackets/ Indexing Ring/ Installation Hardware
Vehicle Specific
Check if this part fits your vehicle.
Up front, a pair of progressive rate, diesel-specific, 4.5" coil springs provides the extra height and smooth handling in the harshest of terrains. A forged drop pitman arm is supplied to correct steering angles. Polyurethane bump stops limit up-travel, while brake line relocation brackets will allow your suspension to easily reach "full droop". To correct the front suspension geometry at the new height, a pair of heavy-duty replacement radius arms is provided that bolt directly into the factory location. These new arms are massive upgrade to the factory stamped units, built from 1/4" American made steel, and internally gusseted with a lower cam adjustment to dial in front end caster. A heavy-duty replacement transmission crossmember as well as a transfer case indexing ring repositions the front driveline output to allow use of the factory drivelines by correcting angles and allowing you to maintain use of 4WD. In the rear, 2.5" heavy-duty coil spacers are supplied to level out the stance and allow you to retain factory ride quality without effecting tow capacity. Extended rear sway bar end links and new bump stops are included to compensate for the lift, and a track bar bracket re-centers the rear axle.
- Accommodates Factory WheelsYes
- AdjustableNo
- Back Spacing4.5"
- Back Spacing 25.5"
- FinishPowdercoat
- Front Lift Height4.5"
- Front Lift MethodStrut Spacers
- Installation Difficulty4 out of 5
- Installation Time7-9 hrs
- Lift TypeLift Kit
- Max Tire Size35 x 12.5
- Max Tire Size 237 x 12.5
- Rear Lift Height2.5"
- Rear Lift MethodCoil Springs
- Requires Metal CuttingYes
- Requires WeldingNo
- Wheel Size 220 x 9
- MaterialSteel
- Required ToolsPitman Arm Puller
- BrandZone Offroad
- Extended information
- EmissionsEmission verification to be determined in ACES, vehicle application data.
- Life Cycle StatusAvailable To Order
- Rim Size
- Diameter [inch]20
- Width [inch]9
- Fitment
- Fitment TypeVehicle Specific
| Year | Make | Model | Notes |
|---|---|---|---|
| 2019 | Ram | 2500 | |
| 2020 | Ram | 2500 | |
| 2021 | Ram | 2500 | |
| 2022 | Ram | 2500 | |
| 2023 | Ram | 2500 |
Shipping Times
Most customers will see their parts within 3-5 business days. We will primarily ship with Purolator ground & DHL Express to ensure the fastest shipping possible.
Please Note: These are only estimates and shipping time may vary depending on your location, out of country and rural locations expect longer wait times.
Where Do We Ship
We will ship our products within Canada and the United States.
Please Note: There are limitations what can be shipped to the United States.
Damaged Shipments
We provide the option to purchase insurance as we are not responsible for any damage while with a courier, we don’t often see issues, but it does happen. If you purchased insurance we will put in a claim, if no insurance was purchased there will be no refunds or exchanges.
Return Policy
It happens sometimes we would like to return it. Here are our return rules:
- Prior to any return you must contact us and get an approval for a RMA number.
- Product must be unopened and have no damage.
- You must pay for the shipping back, please insure so if anything happens you can make a claim, we are not responsible for damage during shipping and is the sole responsibility of the customer.
- Regular products are subject to a 5% Restocking fee.
- Items over 50 lbs. or special orders will be subject to a 20% Restocking fee.
- Electronics & Tuning is a final sale and cannot be returned.