Subtotal:$0.00
Shop Aftermarket Truck Parts & Tires
Screamer Turbo Manifold Package Dodge 6.7L Cummins 2007.5-2012
Screamer Turbo Manifold Package Dodge/RAM 6.7L Cummins 2007.5-2012
- TURBOCHARGER UNIT
- Can support modifications up to 690HP
- Ballistic Billet 64.5mm 7+7 blade compressor wheel and Low MOI QST 70mm 12 blade turbine wheel
- The QST Turbine wheel as a 15% reduction in MOI (moment of inertia) which results in quicker turbo response
- QST turbine Blade thickness decreased by 25% allowing for higher turbine gas flow and increased efficiency
- Each actuator is calibrated and tested prior to shipping
- VSR high speed balanced
- MANIFOLD
- Pre-drilled for pyrometer probes
- Gasket, Bolt and Spacers kits are available separately
- 6.7L performance stock replacement manifold for use with the Holset HE351 Turbo
- Cast of high silicon ductile iron to withstand extreme temperature cycling caused during DPF regeneration
- Thick walled casting and integral slip joint prevents cracking and exhaust leaks
- Fully EGR compatible
- Drops in to the stock location
A drop-in stock installation, stock looking replacement that is anything but stock! The larger Ballistic Billet compressor wheel and our new exclusive Low MOI QST turbine wheel results in reduced backpressure, quicker response, increased efficiency and increased turbine flow compared to the competition. This results in increased maximum potential power output, right up to 690 horsepower with supporting modifications. No extra parts to install, just drop-in and enjoy the extra power potential. Perfectly paired with a pulse manifold made from high-silicon ductile iron and designed to withstand extreme temperatures and vibration. Precision slip joints allow the manifold to expand and contract, which reduces cyclic thermal fatigue and greatly increases manifold longevity.
- CategoryStock Replacement
- Engine6.7L Cummins 07.5-12
- MakeDodge
- Prop 65 (C, R or CR)CR
- Prop 65 - Short Labelbddiesel_prop65_warning.png
- Prop 65 Yes/NoYes
- Suggested Product1045965
- BrandBD Diesel
- Extended information
- EmissionsNot Legal For C.A.R.B. - This part is not legal for sale or use in C.A.R.B. restricted areas.
- Life Cycle StatusAvailable To Order
Shipping Times
Most customers will see their parts within 3-5 business days. We will primarily ship with Purolator ground & DHL Express to ensure the fastest shipping possible.
Please Note: These are only estimates and shipping time may vary depending on your location, out of country and rural locations expect longer wait times.
Where Do We Ship
We will ship our products within Canada and the United States.
Please Note: There are limitations what can be shipped to the United States.
Damaged Shipments
We provide the option to purchase insurance as we are not responsible for any damage while with a courier, we don’t often see issues, but it does happen. If you purchased insurance we will put in a claim, if no insurance was purchased there will be no refunds or exchanges.
Return Policy
It happens sometimes we would like to return it. Here are our return rules:
- Prior to any return you must contact us and get an approval for a RMA number.
- Product must be unopened and have no damage.
- You must pay for the shipping back, please insure so if anything happens you can make a claim, we are not responsible for damage during shipping and is the sole responsibility of the customer.
- Regular products are subject to a 5% Restocking fee.
- Items over 50 lbs. or special orders will be subject to a 20% Restocking fee.
- Electronics & Tuning is a final sale and cannot be returned.
- Fitment TypeVehicle Specific
Year | Make | Model | Notes |
---|---|---|---|
2007 | Dodge | Ram 2500 | Direct replacement for stock turbo and exhaust manifold;; EngineBase: 6.7 L (408 cid) L6 Bore: 4.2126 in.(107.0mm) Stroke: 4.8819 in.(124.0mm); |
2007 | Dodge | Ram 3500 | Direct replacement for stock turbo and exhaust manifold;; EngineBase: 6.7 L (408 cid) L6 Bore: 4.2126 in.(107.0mm) Stroke: 4.8819 in.(124.0mm); |
2008 | Dodge | Ram 2500 | Direct replacement for stock turbo and exhaust manifold;; EngineBase: 6.7 L (408 cid) L6 Bore: 4.2126 in.(107.0mm) Stroke: 4.8819 in.(124.0mm); |
2008 | Dodge | Ram 3500 | Direct replacement for stock turbo and exhaust manifold;; EngineBase: 6.7 L (408 cid) L6 Bore: 4.2126 in.(107.0mm) Stroke: 4.8819 in.(124.0mm); |
2009 | Dodge | Ram 2500 | Direct replacement for stock turbo and exhaust manifold;; EngineBase: 6.7 L (408 cid) L6 Bore: 4.2126 in.(107.0mm) Stroke: 4.8819 in.(124.0mm); |
2009 | Dodge | Ram 3500 | Direct replacement for stock turbo and exhaust manifold;; EngineBase: 6.7 L (408 cid) L6 Bore: 4.2126 in.(107.0mm) Stroke: 4.8819 in.(124.0mm); |
2010 | Dodge | Ram 2500 | Direct replacement for stock turbo and exhaust manifold;; EngineBase: 6.7 L (408 cid) L6 Bore: 4.2126 in.(107.0mm) Stroke: 4.8819 in.(124.0mm); |
2010 | Dodge | Ram 3500 | Direct replacement for stock turbo and exhaust manifold;; EngineBase: 6.7 L (408 cid) L6 Bore: 4.2126 in.(107.0mm) Stroke: 4.8819 in.(124.0mm); |
2011 | Ram | 2500 | Direct replacement for stock turbo and exhaust manifold;; EngineBase: 6.7 L (408 cid) L6 Bore: 4.2126 in.(107.0mm) Stroke: 4.8819 in.(124.0mm); |
2011 | Ram | 3500 | Direct replacement for stock turbo and exhaust manifold;; EngineBase: 6.7 L (408 cid) L6 Bore: 4.2126 in.(107.0mm) Stroke: 4.8819 in.(124.0mm); |
2012 | Ram | 2500 | Direct replacement for stock turbo and exhaust manifold;; EngineBase: 6.7 L (408 cid) L6 Bore: 4.2126 in.(107.0mm) Stroke: 4.8819 in.(124.0mm); |
2012 | Ram | 3500 | Direct replacement for stock turbo and exhaust manifold;; EngineBase: 6.7 L (408 cid) L6 Bore: 4.2126 in.(107.0mm) Stroke: 4.8819 in.(124.0mm); |