• Catalog

    Regional settings

Previous image
Screamer Turbo Manifold Package RAM 6.7L Cummins 2013-2018
Next image
        • Screamer Turbo Manifold Package RAM 6.7L Cummins 2013-2018
        • Screamer Turbo Manifold Package RAM 6.7L Cummins 2013-2018
        • Screamer Turbo Manifold Package RAM 6.7L Cummins 2013-2018
        • Screamer Turbo Manifold Package RAM 6.7L Cummins 2013-2018
        • Screamer Turbo Manifold Package RAM 6.7L Cummins 2013-2018

        Screamer Turbo Manifold Package RAM 6.7L Cummins 2013-2018

        SKU: 1045871-BKJX

        Screamer Turbo Manifold Package RAM 6.7L Cummins 2013-2018 2500/3500

        • TURBOCHARGER:
        • Experience quick spool times and low drive pressures with an overall increase in performance
        • 50-STATE LEGAL!
        • Fully EGR compatible
        • Open throat outlet flange outperforms the stock manifold
        • CARB EO No D-553-5
        • Drops in to the stock location
        • Can support modifications up to 690HP
        • Ballistic Billet 64.5mm 7+7 blade compressor wheel and Low MOI QST 70mm 12 blade turbine wheel
        • The QST Turbine wheel has a 15% reduction in MOI (moment of inertia) which results in quicker turbo response
        • QST Turbine blade thickness decreased by 25% allowing for higher turbine gas flow and increased efficiency
        • VSR high speed balanced
        • Each actuator is calibrated and tested prior to shipping
        • MANIFOLD:
        • Pre-drilled for pyrometer probes
        • Gasket, Bolt and Spacers kits are available separately
        • 6.7L performance stock replacement manifold for use with the Holset HE351 Turbo
        • Cast of high silicon ductile iron to withstand extreme temperature cycling caused during DPF regeneration
        • Larger porting design than others will handle any increase in power
        • Thick walled casting and integral slip joint prevents cracking and exhaust leaks
        0.0
        BD Diesel
        Vehicle Specific
        Check if this part fits your vehicle.
        • Brand: BD Diesel
        • $4849.95 +$700.00 Core Charge
          Core Charge

          A core is some portion of a part that can be recycled or reused by the manufacturer. This helps to reduce product cost and is good for our environment. For this reason a product with a core has an additional charge associated with it. If the old part is returned in reusable condition, the core charge will be refunded.

        A drop-in stock installation, stock looking replacement that is anything but stock! The larger Ballistic Billet compressor wheel and our new exclusive Low MOI QST turbine wheel results in reduced backpressure, quicker response, increased efficiency and increased turbine flow compared to the competition. This results in increased maximum potential power output, right up to 690 horsepower with supporting modifications. No extra parts to install, just drop-in and enjoy the extra power potential. Perfectly paired with a pulse manifold made from high-silicon ductile iron and designed to withstand extreme temperatures and vibration. Precision slip joints allow the manifold to expand and contract, which reduces cyclic thermal fatigue and greatly increases manifold longevity.

          • SKU
            1045871-BKJX
          • Weight
            83 lbs
          • Barcode
            00990011409742
          • Dimensions (L x W x H)
            46 x 16 x 15 in
          • Manufacturer Part #
            1045871
        • Category
          Stock Replacement
        • Engine
          6.7L Cummins 13-18
        • Make
          Dodge
        • Prop 65 (C, R or CR)
          CR
        • Prop 65 - Short Label
          bddiesel_prop65_warning.png
        • Prop 65 Yes/No
          Yes
        • Suggested Product
          1045965
        • Brand
          BD Diesel
        • Extended information
          • Emissions
            Not Legal For C.A.R.B. - This part is not legal for sale or use in C.A.R.B. restricted areas.
          • Life Cycle Status
            Available To Order
        Customer reviews
        Please sign in to add review
        There are no comments yet. Be the first to leave a comment

        Shipping Times

        Most customers will see their parts within 3-5 business days. We will primarily ship with Purolator ground & DHL Express to ensure the fastest shipping possible.

        Please Note: These are only estimates and shipping time may vary depending on your location, out of country and rural locations expect longer wait times.

        Where Do We Ship 

        We will ship our products within Canada and the United States.

        Please Note: There are limitations what can be shipped to the United States.

        Damaged Shipments

        We provide the option to purchase insurance as we are not responsible for any damage while with a courier, we don’t often see issues, but it does happen. If you purchased insurance we will put in a claim, if no insurance was purchased there will be no refunds or exchanges.

        We accept the following payment methods:


        Return Policy

        It happens sometimes we would like to return it. Here are our return rules:

        • Prior to any return you must contact us and get an approval for a  RMA number. 
        • Product must be unopened and have no damage. 
        • You must pay for the shipping back, please insure so if anything happens you can make a claim, we are not responsible for damage during shipping and is the sole responsibility of the customer.
        • Regular products are subject to a 5% Restocking fee.
        • Items over 50 lbs. or special orders will be subject to a 20% Restocking fee.
        • Electronics & Tuning is a final sale and cannot be returned. 
        • Fitment Type
          Vehicle Specific
        YearMakeModelNotes
        2013Ram2500Direct replacement for stock turbo and exhaust manifold;; EngineBase: 6.7 L (408 cid) L6 Bore: 4.2126 in.(107.0mm) Stroke: 4.8819 in.(124.0mm);
        2013Ram3500Direct replacement for stock turbo and exhaust manifold;; EngineBase: 6.7 L (408 cid) L6 Bore: 4.2126 in.(107.0mm) Stroke: 4.8819 in.(124.0mm);
        2014Ram2500Direct replacement for stock turbo and exhaust manifold;; EngineBase: 6.7 L (408 cid) L6 Bore: 4.2126 in.(107.0mm) Stroke: 4.8819 in.(124.0mm);
        2014Ram3500Direct replacement for stock turbo and exhaust manifold;; EngineBase: 6.7 L (408 cid) L6 Bore: 4.2126 in.(107.0mm) Stroke: 4.8819 in.(124.0mm);
        2015Ram2500Direct replacement for stock turbo and exhaust manifold;; EngineBase: 6.7 L (408 cid) L6 Bore: 4.2126 in.(107.0mm) Stroke: 4.8819 in.(124.0mm);
        2015Ram3500Direct replacement for stock turbo and exhaust manifold;; EngineBase: 6.7 L (408 cid) L6 Bore: 4.2126 in.(107.0mm) Stroke: 4.8819 in.(124.0mm);
        2016Ram2500Direct replacement for stock turbo and exhaust manifold;; EngineBase: 6.7 L (408 cid) L6 Bore: 4.2126 in.(107.0mm) Stroke: 4.8819 in.(124.0mm);
        2016Ram3500Direct replacement for stock turbo and exhaust manifold;; EngineBase: 6.7 L (408 cid) L6 Bore: 4.2126 in.(107.0mm) Stroke: 4.8819 in.(124.0mm);
        2017Ram3500Direct replacement for stock turbo and exhaust manifold;; EngineBase: 6.7 L (408 cid) L6 Bore: 4.2126 in.(107.0mm) Stroke: 4.8819 in.(124.0mm);
        2017Ram2500Direct replacement for stock turbo and exhaust manifold;; EngineBase: 6.7 L (408 cid) L6 Bore: 4.2126 in.(107.0mm) Stroke: 4.8819 in.(124.0mm);
        2018Ram2500Direct replacement for stock turbo and exhaust manifold;; EngineBase: 6.7 L (408 cid) L6 Bore: 4.2126 in.(107.0mm) Stroke: 4.8819 in.(124.0mm);
        2018Ram3500Direct replacement for stock turbo and exhaust manifold;; EngineBase: 6.7 L (408 cid) L6 Bore: 4.2126 in.(107.0mm) Stroke: 4.8819 in.(124.0mm);

        Cart