FASS Fuel Systems Drop-In Series Diesel Fuel System 2017-2024 Ford 6.7L Powerstroke (DIFSFRD1001)

        THE DROP-IN SERIES FASS FOR THE 6.7L POWERSTROKE WAS DESIGNED TO MOUNT IN THE FACTORY WATER SEPARATOR LOCATION AND MAY NOT WORK WITH AFTERMARKET FUEL TANKS THAT HAVE GREATER FUEL CAPACITY THAN THE STOCK FUEL TANK. YOU MUST VERIFY THAT YOU HAVE ADEQUATE SPACE TO MOUNT THE DROP-IN SERIES FASS SYSTEM IF YOU HAVE AND AFTERMARKET FUEL TANK.

        NOTE: This kit is designed for CREW CAB SHORT BED and CREW CAB LONG BED trucks.

        0.0
        Vehicle Specific
        Fass
        • Brand: Fass
        • $646.65
        Available for backorder

        Description

        FASS Fuel Systems Drop-In Series Diesel Fuel System 2017-2024 Ford 6.7L Powerstroke (DIFSFRD1001)

        Fits: 2017-2024 Ford F-250, F-350, F-450 6.7L Powerstroke

        Part No: DIFSFRD1001

        The FASS Drop-In Series Diesel Fuel System was engineered by FASS to be the most effective filtration solution for the 6.7L Powerstroke. Backed by our limited lifetime warranty, the Drop-In Series Fuel System protects your 6.7L Powerstroke from the issues caused by fuel contamination.

        Without proper fuel filtration, modern diesel injection systems are prone to excessive wear, which can cost THOUSANDS! By removing over 99% of the water from your diesel fuel, along with entrained air and debris down to 2 Microns, the Drop-In Series System protects the 6.7L Powerstroke injection system from premature failure.

        Additionally, by eliminating the contaminants mentioned above, our Drop-In Series System for the 6.7L Powerstroke optimizes MPG (results will vary), restores horsepower, and sharpens throttle response.

        And if reliability, optimized MPG, restored horsepower, and a sharper throttle response isn’t enough, this system can be installed in an hour or less! This is a true plug-and-play system, requiring no cutting, wiring, or additional modifications.

        Our industry-leading water removal capabilities (3rd-party proven to exceed 99%) are reinforced by the unique design of our Extreme Water Separator (XWS). If our XWS reaches capacity, it acts as a dam, shutting down your truck and preventing major destruction of fuel system components.

        • FASS Drop-In Technology was developed to achieve industry-leading filtration with the simplest possible installation—making our Drop-In Series Systems a true bolt-in upgrade. If you’re mechanically inclined, a Drop-In Series Fuel System can be installed in your driveway in less than an hour! But don’t let the easy installation fool you—our Drop-In Series Fuel Systems offer the same world-class filtration as our Titanium Signature Series and Industrial Series lines.
        • Performance Radius Cuts (PRC) are an advanced machining technique used to improve the flow of fuel through the FASS System by creating smooth-flowing cuts within the filtration system. This prevents the reintroduction of air and vapor back into the fuel and prevents eddy currents from forming within the corner of a 90-degree sharp angle. FASS Drop-In Fuel Systems are the only Fuel Air Separation System that incorporates these exclusive Performance Radius Cuts, lesser competitors commonly use T-Bone and square 90-degree fittings that can limit fuel flow, cause restrictions and reintroduce air back into your fuel.

        NOTE: This kit is designed for CREW CAB SHORT BED and CREW CAB LONG BED trucks.

        Installation of this kit on a cab and chassis may require modifications.

        Please Note: This plug-and-play filtration system retains the 6.7L Powerstrokes OEM in-tank fuel pump.
         This Drop-In Series System requires the filters XWS3002XL & CWS1010

        2017-2024 6.7L Powerstroke Drop-In Series System Features:

        • The only drop-in 6.7L Powerstroke filtration system that retains full functionality of the water-in-fuel sensor!
        • The only drop-in 6.7L Powerstroke filtration system with air separation!
        • Increases lubricity of the fuel by up to 10% by removing entrained air and air vapor.
        • Extends the life of fuel injection system components.
        • Over 99% free and emulsified water separation with our Extreme Water Separator technology.
        • 2 Micron absolute filtration rating.
        • 100% drop-In, no additional modifications needed.
        • Retains the factory in-tank lift pump.
        • Internal air separation passages for removing entrained air and air vapor.
        • Electric heater options available for improved cold weather reliability.
          • SKU
            DIFSFRD1001-FKRH
          • Weight
            28 lbs
          • Dimensions (L x W x H)
            18 x 14 x 28 in
          • Manufacturer Part #
            DIFSFRD1001
        • Brand
          Fass
        • Placement on Car
          Fuel Pump
        • Manufacturer
          FASS
        • MPN
          DIFSFRD1001
        • Country/Region of Manufacture
          United States
        • Features
          Drop-In
        • EAN
          850044137473
        • Sold As
          Each
        • Harmonized Tariff Code
          84133010
        Customer reviews
        Please sign in to add review
        There are no comments yet. Be the first to leave a comment

        Shipping Times

        Most customers will see their parts within 3-5 business days. We will primarily ship with Purolator ground & DHL Express to ensure the fastest shipping possible.

        Please Note: These are only estimates and shipping time may vary depending on your location, out of country and rural locations expect longer wait times.

        Where Do We Ship 

        We will ship our products within Canada and the United States.

        Please Note: There are limitations what can be shipped to the United States.

        Damaged Shipments

        We provide the option to purchase insurance as we are not responsible for any damage while with a courier, we don’t often see issues, but it does happen. If you purchased insurance we will put in a claim, if no insurance was purchased there will be no refunds or exchanges.

        We accept the following payment methods:


        Return Policy

        It happens sometimes we would like to return it. Here are our return rules:

        • Prior to any return you must contact us and get an approval for a  RMA number
        • Product must be unopened and have no damage. 
        • You must pay for the shipping back, please insure so if anything happens you can make a claim, we are not responsible for damage during shipping and is the sole responsibility of the customer.
        • Regular products are subject to a 5% Restocking fee.
        • Items over 50 lbs. or special orders will be subject to a 20% Restocking fee.
        • Electronics & Tuning is a final sale and cannot be returned. 
        • Fitment Type
          Vehicle Specific
        YearMakeModel
        2024FordF-250 Super Duty
        2024FordF-350 Super Duty
        2023FordF-250 Super Duty
        2023FordF-350 Super Duty
        2022FordF-250 Super Duty
        2022FordF-350 Super Duty
        2021FordF-250 Super Duty
        2021FordF-350 Super Duty
        2020FordF-350 Super Duty
        2020FordF-250 Super Duty
        2019FordF-250 Super Duty
        2019FordF-350 Super Duty
        2018FordF-250 Super Duty
        2018FordF-350 Super Duty
        2017FordF-250 Super Duty
        2017FordF-350 Super Duty