Previous image
Fabtech 5" RADIUS ARM KIT W/ 4.0 COIL OVERS
  • Sale
Next image

        Fabtech 5" RADIUS ARM KIT W/ 4.0 COIL OVERS RESI DIRT LOGIC SS AND REAR 2.25 DL SS 2019-22 RAM 2500 4WD

        Fabtech 5" RADIUS ARM KIT WITH 4.0 COIL OVERS RESERVOIR DIRT LOGIC SS AND REAR 2.25 DIRT LOGIC SS SHOCKS 2019-22 RAM 2500 4WD

        Lift Kit Suspension; Dirt Logic 4.0 ™; 5 Inch Front Lift; 5 Inch Rear Lift; With Front Dirt Logic Remote Reservoir Coil Over Shock Absorbers And Rear Dirt Logic Shock Absorbers; Black Components/ Silver Shock Absorbers; With Front Coil Over Shock Mounts/ Rear Coil Springs/ Radius Arms/ Front And Rear Track Bar Brackets/ Pitman Arm/ Bump Stop Spacers/ Stabilizer Bar Links/ Installation Hardware 

        0.0
        Fabtech
        • Brand: Fabtech
        Vehicle Specific
          • 8% off
        • $8935.88 save $735.88
        • $8200.00

        Improving on the Ram suspension design, Fabtech offers their trademark Radius Arms in a complete lift kit. These exclusive tubular Radius Arms have recognizable dimple die side plates for superior strength and a signature of quality. The rugged Arms provide increased caster for use with oversized tires and lifted suspension heights. For maximum suspension damping, this Ram lift kit features the massive stainless steel Dirt Logic 4.0 Coilovers. These top shelf Coilovers bolt to the factory upper coil bucket with support gussets for superior strength. The lower mounts weld to the axle housing and have cross support gussets for the factory Track Bar bracket. Heavy-Duty 1/4 Inch thick steel front and rear Track Bar drop brackets center the axles under the vehicle with the new ride height. For the rear, this lift kit has the perfect balance between ride quality and retaining the factory carrying capacity. By utilizing a dual rate spring design, it provides a good highway ride in the first stage of compression then the second stage handles heavy loads. This high end lift kit system is the ultimate suspension upgrade for Ram 2500. 

        • Fabtech's Trademark Radius Arms With Recognizable Dimple Die Side Plates Providing Additional Strength And Increased Caster
        • Bolt-On Ram Coilover Conversion For The Best Ride Quality On And Offroad
        • Heavy-Duty Track Bar Drop Brackets Center The Axles Under Vehicle For Proper Tracking
        • Dual Rate Rear Coil Springs For Factory Load Capacity And A Smooth Ride
        • Provides Excellent Damping For Offroad Use
        • Limited Lifetime Warranty
          • SKU
            K3184DL-BKBN
          • Weight
            354.8 lbs
          • Barcode
            00674866108813
          • Dimensions (L x W x H)
            45.5 x 46.3 x 35.2 in
          • Manufacturer Part #
            K3184DL
        • California Proposition 65
          WARNING: Cancer & Reproductive Harm and image
        • Brand
          Fabtech
        • Extended information
          • Emissions
            Emission verification to be determined in ACES, vehicle application data.
          • Life Cycle Status
            Available To Order
        Customer reviews
        Please sign in to add review
        There are no comments yet. Be the first to leave a comment

        Shipping Times

        Most customers will see their parts within 3-5 business days. We will primarily ship with Purolator ground & DHL Express to ensure the fastest shipping possible.

        Please Note: These are only estimates and shipping time may vary depending on your location, out of country and rural locations expect longer wait times.

        Where Do We Ship 

        We will ship our products within Canada and the United States.

        Please Note: There are limitations what can be shipped to the United States.

        Damaged Shipments

        We provide the option to purchase insurance as we are not responsible for any damage while with a courier, we don’t often see issues, but it does happen. If you purchased insurance we will put in a claim, if no insurance was purchased there will be no refunds or exchanges.

        We accept the following payment methods:


        Return Policy

        It happens sometimes we would like to return it. Here are our return rules:

        • Prior to any return you must contact us and get an approval for a  RMA number
        • Product must be unopened and have no damage. 
        • You must pay for the shipping back, please insure so if anything happens you can make a claim, we are not responsible for damage during shipping and is the sole responsibility of the customer.
        • Regular products are subject to a 5% Restocking fee.
        • Items over 50 lbs. or special orders will be subject to a 20% Restocking fee.
        • Electronics & Tuning is a final sale and cannot be returned. 
        • Fitment Type
          Vehicle Specific
        YearMakeModelNotes
        2019Ram2500
        2020Ram2500
        2021Ram2500
        2022Ram2500