0
items
Your cart is empty
Subtotal:$0.00
|
Fabtech 3" UNIBALL UCA SYS W/ DL 2.5 RESI & 2.25 2019-23 RAM 1500
Fabtech 3" UNIBALL UPPER CONTROL ARM SYSTEM WITH DIRT LOGIC 2.5 RESI & 2.25 2019-23 RAM 1500.
Lift Kit Suspension; Dirt Logic; 3 Inch Front Lift; 3 Inch Rear Lift; With Front Dirt Logic Remote Reservoir Coil Over Shock Absorbers And Rear Dirt Logic Shock Absorbers In Kit; Black Components/ Silver Shock Absorbers; With Rear Coil Spring Spacers/ Front Tubular Control Arms/ Installation Hardware
Vehicle Specific
Fabtech's high-quality Ram lift kit offers increased front suspension travel for enhanced offroad capabilities with clearance to run 35 Inch tall tires. The stance of the vehicle will become more level front to rear for an aggressive look. The factory Ram upper control arms are replaced with Fabtech's Uniball Upper Control Arms that provide additional wheel travel with an extra degree of caster compared to stock arms. The increased caster helps to balance steering effort with oversized tires. The Fabtech upper control arms are constructed of the finest material with 0.120 Inch wall 1-1/4 Inch Outer Diameter 4130 Chromoly steel tubing. This is superior to the stock plastic arms. Yes, the stock arms are plastic. Fabtech arms will add rigidity and strength to the Ram suspension. High-quality 1 Inch FK Stainless PTFE lined Uniball bearings are utilized in place of the small factory ball joints and allow for increased travel without bind. These super stout Ram upper control arms are designed for longevity in rugged offroad conditions while providing a more positive on-road feel. The Fabtech upper control arms have been designed to work in conjunction with the Dirt Logic 2.5 Coilover shocks to provide additional front wheel travel. The rear suspension receives Dirt Logic 2.25 shocks for a balanced ride. All Dirt Logics are constructed with a stainless steel body and a NitroSteel ® piston rod for maximum corrosion resistance in the harshest conditions. These Dirt Logics have been extensively tested and tuned to provide a superior ride quality both on and offroad. This system is perfect for those that want increased suspension performance with a low lift height. A great choice for daily drivers that want a clean look with the ability to hit the trails on weekends
- UCA's Eliminate Factory Upper Ball Joint With Super Strong 1 Inch ID Stainless Steel American Uniball For Increased Suspension Strength
- Additional Caster Is Built Into Arms For Enhanced Align Ability With Oversized Tires
- 1-1/4 Inch Outer Diameter 0.120 Inch Wall 4130 Chromoly Tubing Reduces Flex Found In Stock Plastic Arms For More Positive Road Feel
- 17-4 Heat Treated Uniball Pin Fits Into Factory Ball Joint Taper Without Modification To The Spindle For Easy Return To Stock Feature
- Great System For The Daily Driver That Requires Increased Offroad Performance
- Limited Lifetime Warranty
- California Proposition 65WARNING: Cancer & Reproductive Harm and image
- BrandFabtech
- Extended information
- EmissionsEmission verification to be determined in ACES, vehicle application data.
- Life Cycle StatusAvailable To Order
Shipping Times
Most customers will see their parts within 3-5 business days. We will primarily ship with Purolator ground & DHL Express to ensure the fastest shipping possible.
Please Note: These are only estimates and shipping time may vary depending on your location, out of country and rural locations expect longer wait times.
Where Do We Ship
We will ship our products within Canada and the United States.
Please Note: There are limitations what can be shipped to the United States.
Damaged Shipments
We provide the option to purchase insurance as we are not responsible for any damage while with a courier, we don’t often see issues, but it does happen. If you purchased insurance we will put in a claim, if no insurance was purchased there will be no refunds or exchanges.
Return Policy
It happens sometimes we would like to return it. Here are our return rules:
- Prior to any return you must contact us and get an approval for a RMA number.
- Product must be unopened and have no damage.
- You must pay for the shipping back, please insure so if anything happens you can make a claim, we are not responsible for damage during shipping and is the sole responsibility of the customer.
- Regular products are subject to a 5% Restocking fee.
- Items over 50 lbs. or special orders will be subject to a 20% Restocking fee.
- Electronics & Tuning is a final sale and cannot be returned.