Fabtech 3" UCA KIT W/UNIBALLS & FR SHK SPCRS & RR COIL SPACERS & RR PERF SHOCKS 2022-23 TOYOTA TU...
  • Sale

        Fabtech 3" UCA KIT W/UNIBALLS & FR SHK SPCRS & RR COIL SPACERS & RR PERF SHOCKS 2022-23 TOYOTA TUNDRA 4WD

        Fabtech 3" UPPER CONTROL ARM  KIT W/UNIBALLS & FONT SHOCK SPACERS & REAR COIL SPACERS & REAR PERFORMANCE SHOCKS 2022-23 TOYOTA TUNDRA 4WD.

        Lift Kit Suspension; 3 Inch Front Lift; 3 Inch Rear Lift; With Rear Performance Shock Absorbers In Kit; Black Components; With Front Strut Assembly Spacers/ Rear Coil Spring Spacers/ Front Upper Control Arms/ Installation Hardware 

        0.0
        Fabtech
        • Brand: Fabtech
        Vehicle Specific
          • 6% off
        • $2669.01 save $169.01
        • $2500.00

        Fabtech's high quality Tundra lift kit offers increased height to run 33 Inch or 35 Inch tall tires with additional front suspension strength. This kit helps level the vehicle stance front to rear for a more aggressive appearance. The factory Tundra upper control arms are replaced with Fabtech's Uniball Upper Control Arms that provide an extra degree of caster compared to stock arms. The increased caster helps to balance steering effort with oversized tires. The Fabtech upper control arms are constructed of the finest material with 0.120 Inch wall 1-1/4 Inch Outer Diameter 4130 Chromoly steel tubing. High quality 1 Inch FK Stainless PTFE lined Uniball bearings are utilized in place of the small factory ball joints and allow for increased travel without bind. These super stout Tundra upper control arms are designed for longevity in rugged offroad conditions while providing a more positive on road feel. The factory front Coilover shocks receive spacers that provide lift while keeping the stock ride quality. Rear lift is accomplished using coil spring spacers that provide the additional ride height. The rear shocks are replaced with Fabtech Performance twin tube shocks for a good rear ride quality. 

        • Arms Eliminate The Upper Ball Joint With Super Strong 1 Inch ID Stainless American Uniball
        • Chromoly Tubing Reduces Flex Found In Stock Arms For More Positive Road Feel
        • 17-4 Stainless Steel Heat Treated Uniball Pin Fits Into Factory Ball Joint Taper Without Modification To The Spindle
        • Retains Stock Front Coilover Shocks For A Factory Ride
        • Perfect System For The Daily Driver That Wants Increased Clearance To Run 33 Inch Or 35 Inch Tires
        • Limited Lifetime Warranty
          • SKU
            K7086-BKBN
          • Weight
            70.2 lbs
          • Barcode
            00674866113503
          • Dimensions (L x W x H)
            24 x 20.26 x 21.6 in
          • Manufacturer Part #
            K7086
        • California Proposition 65
          WARNING: Cancer & Reproductive Harm and image
        • Brand
          Fabtech
        • Extended information
          • Emissions
            Emission verification to be determined in ACES, vehicle application data.
          • Life Cycle Status
            Available To Order
        Customer reviews
        Please sign in to add review
        There are no comments yet. Be the first to leave a comment

        Shipping Times

        Most customers will see their parts within 3-5 business days. We will primarily ship with Purolator ground & DHL Express to ensure the fastest shipping possible.

        Please Note: These are only estimates and shipping time may vary depending on your location, out of country and rural locations expect longer wait times.

        Where Do We Ship 

        We will ship our products within Canada and the United States.

        Please Note: There are limitations what can be shipped to the United States.

        Damaged Shipments

        We provide the option to purchase insurance as we are not responsible for any damage while with a courier, we don’t often see issues, but it does happen. If you purchased insurance we will put in a claim, if no insurance was purchased there will be no refunds or exchanges.

        We accept the following payment methods:


        Return Policy

        It happens sometimes we would like to return it. Here are our return rules:

        • Prior to any return you must contact us and get an approval for a  RMA number
        • Product must be unopened and have no damage. 
        • You must pay for the shipping back, please insure so if anything happens you can make a claim, we are not responsible for damage during shipping and is the sole responsibility of the customer.
        • Regular products are subject to a 5% Restocking fee.
        • Items over 50 lbs. or special orders will be subject to a 20% Restocking fee.
        • Electronics & Tuning is a final sale and cannot be returned. 
        • Fitment Type
          Vehicle Specific
        YearMakeModelNotes
        2022ToyotaTundra
        2023ToyotaTundra